EXTRUDED POLYCARBONATE SHEETS WITH INCREASED ABRASION RESISTANCE.
IMPEX® HC are UV-protected polycarbonate sheets with a one- or both sides abrasion resistant coating and a good impact resistance, which makes them especially suitable for flat indoor and outdoor applications. Thanks to this special hard coating, the sheets are less sensitive against scratches and have a high resistance to many chemicals and solvents.
IMPEX® HC is used for applications such as machine glazing or partition walls – wherever an enhanced abrasion- and chemical resistance is required.
In terms of processing, IMPEX® HC can be used mostly in the same way as IMPEX® in its standard version. Due to the special surface coating, however, IMPEX® HC is not suitable for hot and cold bending.
JOIN US ON OUR SUSTAINABLE MISSION!
Available upon request.
|Colour||Variant||Thickness (mm)||Width (mm)||Length (mm)|
|Clear transparent HC2||HC 2 = both sides abrasion resistant with UV protection||4 / 5 / 6 / 8 / 10 / 12||2050||3050|
|Clear transparent HC2||HC 2 = both sides abrasion resistant with UV protection||2 / 3 / 15||2050||3050|
|Clear transparent HC1||HC 1 = one side abrasion resistant with UV protection||2 / 3 / 4 / 5 / 6 / 8 / 10 / 12 / 15||2050||3050|
All formats are standard formats ex works. Other thicknesses and formats are available upon request.
The colours visualised may vary from the original. To ensure exact colour matching please ask for a colour sample.