DIBOND®anodized

In a special procedure, the surfaces of DIBOND®anodized are provided with an anodic coating thickness of 5 μm or 10 μm and are therefore clearly harder when compared with lacquer systems. Due to its corrosion resistance and robustness, DIBOND®anodized can be used everywhere where particular robustness is required. The especially authentic metal effect of the material ensures consistently high quality visuals, particularly with interior applications. DIBOND®anodized is therefore predominantly used for decorative surfaces in shop, furniture and trade fair constructions, for product advertisements at PoP counters and displays. In terms of its processing, DIBOND®anodized can be processed in the same ways as the standard DIBOND®. With round bends, however, large bending radii must be applied to make sure that the anodic layer does not break. For the routing and folding technique we recommend the use of varnished surfaces.

 

At a glance:

  • Anodized on each side
  • Abrasion proof and scratch resistant
  • No finger print markings left on the surface
  • Highly suited to screen printing
  • For interior uses

Standard formats ex work

DIBOND® anodized 5 μm is available in the following standard formats:

Thickness 3 4
Standard formats (W x L)
1250 x 2500 * *
1250 x 3050 * *



DIBOND® anodized 10 μm is available in the following standard formats:

Thickness 2 3 4 6
Standard formats (W x L)
1500 x 3100 * * * *
1500 x 4100 * * * *

Dimensions are in mm

Cut-to-size formats are available from your local DIBOND®distributor.